Chimney & Fireplace Frequently Asked Questions
Q. Why do I need my chimney cleaned?
When you burn wood or fire logs, whether they are Duraflame, Pine Mountain, etc., the smoke that travels up the chimney contains small particles of tar and unburned wood. These substances collect and build up on the chimney’s walls, creating a material called creosote.
Creosote is very flammable and can easily catch on fire, which means it must be removed regularly in order to prevent a fire from starting in the chimney area. Believe it or not, the chimney is not made to have fire in it…only smoke. If you choose not to clean your chimney, you take the risk of a potential fire rupturing and cracking the inner liner of the chimney. This will allow flames to get into any area that is touching the chimney and that includes the roof and/or surrounding trees. Cleaning your chimney annually prevents this from happening.
It’s simple – if you’re going to use your chimney, clean it.
Q. How often should I have my chimney cleaned?
The quick answer is, according to the National Fire Protection Association (NFPA) standard 211, “Chimneys, fireplaces, and vents shall be inspected at least once a year for soundness, freedom from deposits, and correct clearances. Cleaning, maintenance, and repairs shall be done if necessary.”
This is the national safety standard and is the correct way to approach cleaning and maintenance of your chimney. It takes into account the fact that, even if you don’t use your chimney much, animals may build nests in the flue or there may be other types of deterioration that could make the chimney unsafe to use.
In addition, the Chimney Safety Institute of America (CSIA) recommends that open masonry fireplaces should be cleaned at 1/4″ of sooty buildup, and sooner if there is any glaze present in the system. Factory-built fireplaces should be cleaned when any appreciable buildup occurs. This is considered to be enough fuel buildup to cause a chimney fire capable of damaging the chimney or spreading to the home.
The bottom line is: Get your chimney inspected once a year (whether you think you need to or not).
Q. My fireplace smokes. What can I do?
There are lots of reasons for smoky fireplaces and stoves. Some reasons include:
1. A buildup of creosote or an animal nest resulting in reduced draft.
What to do? Clean the chimney.
2. The damper may be closed or partially closed.
What to do? Look up to the damper area and see if you can see it open (you may have to be moving the handle while you do this to see it). If it seems stuck, call in our experts to take a look.
3. The flue is too small for the fireplace it is servicing.
What to do? A simple test is to place a 4″ to 6″ wide strip of aluminum foil across the entire top of the opening of the fireplace (where the smoke would be rolling out from). Burn a fire and see if the smoke is stopped or reduced. If this prevents the smoke from coming out, a piece of metal can be made or purchased to stay there permanently. This is called a smoke guard. The more elaborate and expensive answer is a draft induction fan placed on top of the chimney to make it draft.
4. Chimney is too short.
What to do? Give us a call to see about restoring or rebuilding your chimney so that it meets correct standards and height requirements.
Q. My fireplace stinks, especially in the summer. What can I do?
The smell is due to creosote deposits in the chimney, a natural byproduct of wood burning. The odor is usually worse in the summer when the humidity is high and the air conditioner is turned on. A good cleaning will help but usually won’t solve the problem completely. There are commercial chimney deodorants that work pretty well, and many people have good results with baking soda or even kitty litter set in the fireplace.
The real problem is the air being drawn down the chimney, a symptom of overall pressure problems in the house. Some make-up air should be introduced somewhere else in the house. A tight-sealing, top mounted damper will also reduce this air flow coming down the chimney. The chimney may also be leaking water into the masonry around the top of the chimney.
Q. When I build a fire in my upstairs fireplace, I get smoke from the basement fireplace.
This has become quite a common problem in modern air-tight houses where weather proofing has sealed up the usual air infiltration routes. The fireplace in use exhausts household air until a negative pressure situation exists. If the house is fairly tight, the simplest route for makeup air to enter the structure is often the unused fireplace chimney. As air is drawn down this unused flue, it picks up smoke that is exiting nearby from the fireplace in use and delivers the smoke to the living area.
The best solution is to provide makeup air to the house so the negative pressure problem no longer exists, thus eliminating not only the smoke problem, but also the potential for carbon monoxide to be drawn back down the furnace chimney. A secondary solution is to install a top mount damper on the fireplace that is used the least.
Q. I heat with gas. Should this chimney be checked, too?
Without a doubt! Although gas is generally a clean-burning fuel, the chimney can become non-functional from bird nests or other debris blocking the flue. Modern furnaces can also cause many problems with the average flues intended to vent the older generation of furnaces.
Q. What should I do if I have a chimney fire?
In case of a chimney fire, follow these steps:
- Call the fire department immediately.
- Alert others in the house to evacuate.
- Close the appliance’s dampers and/or the primary air inlet controls, limiting the fire’s air supply and reducing its intensity. If there is a barometric damper in the chimney connector, plug or close the opening in the barometric damper.
- Open the appliance door just enough to insert the nozzle of a 10-lb. dry chemical fire extinguisher rated for Class ABC fires. Discharge the entire content of the extinguisher into the appliance and shut the door.
- If possible, wet down the roof and other outside combustibles to prevent fires ignited by shooting sparks and flames.
- Closely monitor all combustible surfaces near the chimney. During severe chimney fires, these surfaces can become hot enough to ignite.
After a chimney fire, have the chimney inspected by a professional chimney sweep or wood stove/fireplace installer, contact your insurance carrier, and do not use the chimney until a professional has inspected it.
The excessive heat produced by a chimney fire can crack chimney walls, damage chimney liners, and damage some types of factory-built chimneys. If not repaired, these damages create a greater possibility for any subsequent chimney fire to spread beyond the confines of the flue to the house.
Give Us a Call
Still have questions? We’d love to hear them, and learn about the ways that we can help you out. Give us a call or reach out to us online now.
Our customers know that we frequently make special offers.…and they love that about us.